Wedge set up

Follow Thread

By patrick r

  • 1 Like
  • 69 Replies
  1. Jason R

    Jason R
    Ottawa, ON

    718 AP2 PW (46*), SM6 50.12F, SM6 54.14F, SM6 60.12K Also have an SM6 46.08F and an AP2 GW (50*) depending on conditions. About to order SM 7s with similar specs - but likely going to D grind on the 60*

    Jason
  2. 50-08 F
    54-10 S
    58-08 M
    58-10 S
    58-12 K

    Our courses in AZ change dramatically throughout the year. The summer Bermuda is cut really tight so I play my 58/10 (sometimes my 58/8) and for the fluffier winter rye I play the 58/12.
  3. Anthony C

    Anthony C
    Tinton Falls NJ

    Love your Titleist 1 iron pic.
  4. Kallander

    Kallander
    Spanaway, WA

    I game srxn z765 PW - 46* v-sole, SM6 50/8 F grind, SM6 56/10 S grind, SM6 60/8 M grind - gives a good variety to hit from many diff lie's. Best thing about the S and M grinds is that I can still hit full shots and open both up for different shots lie's. I also found that the F grid works well in firm wet sand.
  5. Anthony C

    Anthony C
    Tinton Falls NJ

    SM6 56 - 08.

    My PW and AW are in the set.
    Post Image
  6. I have the AP1 716 PW 43, W 47, SM6 52 08, miz 60 10. I feel this may not be the best setup. any ideas please.
  7. Anthony C

    Anthony C
    Tinton Falls NJ

    Depends on how you play golf, Haseeb. Its different for everyone.

    Just from your post, if you start to see a gap in shots or whatever, consider a 56 in there.

    I play a 45 degree PW, 50 AW, and the 56 Vokey. Thats my style.

    Whats yours?
  8. ADeLucia

    ADeLucia
    Clayton NC

    SM7 52 12F 56 14F 60 12D. The D grind was a huge game changer for me for versatility around the greens. Give you the forgiveness and bounce of a K grind with the ability to open the face more without the leading edge coming up in the air
  9. El bandito

    El bandito
    Fife Bonny Scotland 🏴󠁧󠁢󠁳󠁣󠁴󠁿

    SM7 50.08F, 56.08M and 60.08M
    I love them.
    I can’t recommend them enough to all my mates!
    Total game changers ️‍♂️
  10. I play the 716 AP1 PW at 43* then a SM6 46-08 F (turned up to 47-09), SM7 52-12 F (turned down to 51-11), and finally

    SM6 56-10 S. I don't play any lob style wedge because I tend to slide the club under the ball and I don't have a place to

    practice any fancy shots.

    Mark F.
  11. Lou G

    Lou G
    San Diego, CA

    Keep it simple...... Vokeys are SM6 50-08 and SM7 58-08M. MD3 64* wedge. I use an RM21 42* in place of a 9 iron.
    Post Image
  12. 50-08F 54-08M 60-08M all SM6. And now just added a 50-08F SM7 and love it. Will be replacing my other two with SM7s.. Thining about 56 instead of 54. Havent's 100% decided on the grind yet.
  13. Dennis M

    Dennis M
    Miami, FL

    I use the 43* pitching wedge and 46* first wedge from my AP1 set. My other wedges are a 50* gap, 54* sand and 58* lob, all the older black nickle series. I keep thinking about ditching the 2 AP1 wedges for a 45% Vokey.I've just been lazy about looking for it.
  14. Lou G

    Lou G
    San Diego, CA

    Update..... use 46-08 (bent to 44) in place of 9 iron. SM6 50-08, SM7 56-08M and 62-08M.
  15. Lou G

    Lou G
    San Diego, CA

    Here it is.... 6* spacing from the 8 iron down to the 62*.
    Post Image
  16. I’ve got the same set up as you and I love my SM6’s
  17. Lou G

    Lou G
    San Diego, CA

    M grind on the SW and LW. Full grind on the PW. 62-08M is actually easier to hit out of a hard bunker vs a 60-04L. I can play between 6-8* of bounce.

    I tried SM6 58-12K bent to 56 a couple years ago. Great out of sand and grassy lies (even with 10* bounce) but not so great for chipping.

    Took an SM7 60-12D out of the demo bin and bent it to 58. Better than the K grind but still 8* bounce suits my game more.

    3 years ago carried an SM5 54-10S. Great for chipping and pitching. Not that stellar for bunker shots.

    This is me. I'm in between being a digger and slider.
  18. Lou G

    Lou G
    San Diego, CA

    Using the 46 as a 9 iron (bent to 44*)

    I found my 64 works better out of hard sand vs the SM7 62-08M The 60-12K is bent to 58 and the 56-08M is bent to 54.
    Post Image
  19. Lou G

    Lou G
    San Diego, CA

    SM7 46-10F (bent to 44), 52-08F (bent to 51), 58-08M. Cally MD3 64/8. I still have my SM6 60-12K (bent to 58).
  20. Lou G

    Lou G
    San Diego, CA

    Final bag. RM21 42* (9 iron replacement), SM7 46-10F-52-08-58-08M, MD3 64/8. For the Sunday bag, I have an Apex Grind 9 iron (45*).
    Post Image
  21. J.C.

    J.C.
    Texas

    My new wedge setup is

    SM7 52.08 F Grind

    SM7 56.10 S Grind

    SM7 60.10 D Grind

    All in the jet black color! Curious to see how they’ll look after some wear!
  22. Lou G

    Lou G
    San Diego, CA

    My final wedge setup. The 42 and 64 have been in my bag 2 years. 46-52-58 are SM7.
    Post Image
  1. Prev
  2. 1
  3. 2
  4. 3
  5. Next

Please login to post a comment.

Sign In

Haven't registered for Team Titleist yet?

Sign Up